21 - 30 of 143
iec-60061-standard
|
Product Description Consists of five test probe: 1) IEC60601-1:2005 Figure 6 - Standard Test Finger 2) IEC60601-1:2005 Figure 7 - Test Hook 3) ...
2016-06-13 16:44:33
|
|
Additional go gauge for caps on finished lamps E12, 7006-27J-1 Purpose: To check the maximum outside (major) diameter, dimension d, of E12 caps on ...
2020-09-22 17:15:45
|
|
E10 Go Gauge for caps on finished lamps according to IEC60061 7006-27A-2 The drawing is intended only to illustrate the essential dimensions of the ...
2020-09-22 17:15:45
|
|
Go gauge for caps on finished lamps E12, 7006-27H-1 Purpose: To check the maximum dimensions of the screw thread and dimension T1 minimum of E12 caps ...
2020-09-22 17:15:45
|
|
Gauge for testing contact-making of lamps fitted with caps E26/25 7006-29-3 Purpose: To check lamp dimensions for contact-making in E26, E26/50x39, ...
2016-10-13 16:00:13
|
|
Gauge for testing contact-making of lamps fitted with caps E26/24 7006-29-3 Purpose: To check lamp dimensions for contact-making in E26, E26/50x39, ...
2016-10-13 15:59:44
|
|
Acceptance gauge for B22d caps intended for automatic wire threading, 7006-3-1 According to standard IEC 60061-3 Purpose: To check the suitability of ...
2020-09-22 17:15:44
|
|
According to standard IEC 60061-3 Purpose: To check dimension G min. of bases G9. Testing: Without use undue force it shall not be possible for the ...
2020-09-22 17:15:43
|
|
CEI 60061-3, NF EN 60061-3, DIN EN 60061-3, IEC EN 60061-3, BS EN 60061-3 7006-54-1 E14 Gauge for Finished Lamps Fitted with E14 Caps for Testing ...
2020-09-22 17:15:43
|
|
BS EN 60061-3,NF EN 60061-3,DIN EN 60061-3,IEC EN 60061-3,CEI 60061-3 7006-28B-1 Not Go Gauge for E14 Caps on Finished Lamps Not go gauge for E14 caps ...
2020-09-22 17:15:44
|