41 - 50 of 143
iec-60061-standard
|
Gauges for testing the insertion of caps in lampholders B22d, 7006-4A-2 According to standard IEC 60061-3 Purpose: To check B22d cap dimensions for ...
2016-08-16 10:05:49
|
|
Gauges for testing the insertion of caps in lampholders B15d, 7006-4A-2 According to standard IEC 60061-3 Purpose: To check B15d cap dimensions for ...
2016-08-16 10:06:47
|
|
According to standard IEC 60061-3 Purpose: To check dimensions A max., N min. D1 min., D1 max., and the diametrical position of the pins of caps B15 ...
2016-08-16 10:12:28
|
|
Not go gauges for caps on finished lamps B15, 7006-10-8 According to standard IEC 60061-3 Purpose: To check dimension A in, of caps B15 on finished ...
2016-08-16 10:13:36
|
|
Gauge for testing the retention of B15d caps in the holder, 7006-4B-1 According to standard IEC 60061-3 Purpose: To check cap dimensions for retention ...
2016-08-16 10:14:44
|
|
IEC 60061-3 7006-57-3 Go and Not Go Gauge for Recessed Double Contact Cap R17d on Finished Lamps For details of cap R17d, see sheet 7004-56. PURPOSE: ...
2016-08-13 11:14:38
|
|
IEC 60061-3 7006-29A-2 E26d Gauge for Caps on Finished Lamps for Testing Protection Against Accidental Contact Dimensions in millimetres The drawing ...
2016-08-16 10:21:18
|
|
Application: Chuangxin Instruments offers a wide range of gauge to meet the most common standards including those from IEC, EN, UL, GB,DIN,VDE and ...
2020-09-22 17:15:45
|
|
The gauge is shown in the test position. In the rest position, the plunger shall be above plane V. PURPOSE: To check lamp dimensions for contact ...
2016-08-13 11:20:25
|
|
E26 Lamp Cap Gauge Include: 1) IEC60061-3: 7006-27D-3 E26 GO Gauge for Caps; 2) IEC60061-3: 7006-29L-4 E26 No Go Gauge for Caps; 3) IEC60061-3: 7006...
2016-08-12 15:36:51
|