81 - 90 of 143
iec-60061-standard
Fa8 Not Go Gauge for Single-pin Cap, 7006-40A-1. Purpose: For the control of dimension E min. of sheet 7004-57. Testing: When the gauge is applied to ...
2016-08-12 15:15:40
|
Fa8 Go Gauge for Single-pin Cap, 7006-40-1. Purpose: For the control of dimensions E max., F max., F min., G max., and H max. of sheet 7004-57. ...
2016-08-12 15:16:40
|
IEC60061-3: 7006-11C-1 BAZ15d Go Gauge for Cap on Finished Lamps PURPOSE: To check dimensions A max., D1 min., D1 max., L max. and the angular ...
2016-08-12 15:18:03
|
IEC60061-3: 7006-19A-1 BAU15s Go Gauge for Cap on Finished Lamp PURPOSE: To check dimensions A max., D1 min., D1 max., N min. and the angular ...
2016-08-12 15:19:35
|
IEC60061-3: 7006-11B-2 BAY15 Go Gauge for Caps on Finished Lamps PURPOSE: To check dimensions A max., D1 min., D1 max., L max. and the angular ...
2016-08-12 15:21:02
|
IEC60061-3: 7006-52-1 Gauge for Finished Lamps Fitted with E40 Caps for Testing Contact Making The gauge is shown in the test position. In the rest ...
2016-08-12 15:22:07
|
The drawing is intended only to illustrate the essential dimensions of the gauge. For details of base MR11, see sheet 7004-108. PURPOSE: To check the ...
2016-08-12 15:23:37
|
For details of base GU5.3, see sheet 7004-109. PURPOSE: To check the base GU5.3 in the following respects: -the diameter of the individual pins ...
2016-08-12 15:28:04
|
G13 Go and No Go Gauges of Lamp Cap 1) IEC60061-3 7006-45-4 Go Gauge for Bi-Pin Cap on Finished Lamp G13 Purpose: To check dimensions E max., F min., ...
2016-08-12 15:29:04
|
G5 Go and No Go Gauges of Lamp Cap 1) IEC60061-3: 7006-46A-3 Go Gauge for Bi-pin Cap on Finished Lamps G5; Purpose: To check dimensions E max., F min....
2016-08-12 15:30:27
|