31 - 40 of 143
iec-60061-standard
BS EN 60061-3,NF EN 60061-3,DIN EN 60061-3,IEC EN 60061-3,CEI 60061-3 7006-27F-1 Go Gauge for E14 Caps on Finished Lamps Go gauge for E14 caps on ...
2020-09-22 17:15:44
|
NF EN 60061-3, DIN EN 60061-3, IEC EN 60061-3, BS EN 60061-3 7006-27G-1 Go Gauge for Dimension "S1" of E14 Caps on Finished Lamp Go gauge for ...
2020-09-22 17:15:44
|
IEC EN 60061-3 7006-55-1 Gauge for Finished Lamps Fitted with E14 Caps for Testing Protection Against Accidental Contact The gauge is shown in the ...
2020-09-22 17:15:43
|
Not go gauges for caps on finished lamps B22, 7006-10-8 According to standard IEC 60061-3 Purpose: To check dimension A in, of caps B22 on finished ...
2020-09-22 17:15:45
|
Not go gauges for caps on finished lamps B22, 7006-10-8 According to standard IEC 60061-3 Purpose: To check dimension A in, of caps B22 on finished ...
2020-09-22 17:15:45
|
NEN / BS / DIN / EN 60061-3 7006-129A-1 G9 Not Go Gauge for Base According to standard IEC 60061-3 Purpose: To check dimension G min. of bases G9. ...
2016-08-13 11:05:28
|
Gauge for testing the retention of B22d caps in the holder, 7006-4B-1 According to standard IEC 60061-3 Purpose: To check cap dimensions for retention ...
2016-08-13 11:30:01
|
Not go gauges for caps on finished lamps B22, 7006-10-8 According to standard IEC 60061-3 Purpose: To check dimension A in, of caps B22 on finished ...
2016-08-13 11:34:31
|
According to standard IEC 60061-3 Purpose: To check dimensions A max., N min. D1 min., D1 max., and the diametrical position of the pins of caps B22 ...
2016-08-13 11:48:22
|
Acceptance gauge for B22d caps intended for automatic wire threading, 7006-3-1 According to standard IEC 60061-3 Purpose: To check the suitability of ...
2016-08-13 11:49:17
|