11 - 20 of 143
iec-60061-standard
|
Go gauge for caps on finished lamps E40, 7006-27-7 Purpose: To check the maximum dimensions of the screw thread and dimension T1 minimum of E40 caps ...
2020-09-22 17:15:44
|
|
Go gauges for caps E26, E26/50x39, E26/51x39 & E26d, 7006-27D-3; Purpose: To check the maximum dimensions of the screw thread and dimension T1 minimum ...
2020-09-22 17:15:44
|
|
Go and not go gauge for bases GU10, 7006-121-1 Purpose: To check the base GU10 in the following respects: -The diameter of the individual pins ...
2020-09-22 17:15:44
|
|
Gauge for testing contact-making of lamps fitted with caps E26/24 7006-29-3 Purpose: To check lamp dimensions for contact-making in E26/24 lampholders...
2020-09-22 17:15:44
|
|
Not go gauge for caps E26, E26/50x39, E26/51x39 & E26d, 7006-29L-4 Purpose: To check the minimum outside (major) diameter of the screw thread, ...
2020-09-22 17:15:43
|
|
Go gauges for caps E26, E26/50x39, E26/51x39 & E26d, 7006-27D-3; Purpose: To check the maximum dimensions of the screw thread and dimension T1 minimum ...
2020-09-22 17:15:43
|
|
Gauge for E27/51x39 caps on finished lamps for testing protect against accidental contact, code 7006-51-2; Purpose: To check protection against ...
2020-09-22 17:15:43
|
|
Gauge for finished lamps fitted with E40 caps for testing protection against accidental contact E40, 7006-53-1 Purpose: To check protection against ...
2020-09-22 17:15:44
|
|
Acceptance gauge for B22d caps intended for automatic wire threading, 7006-3-1 According to standard IEC 60061-3 Purpose: To check the suitability of ...
2020-09-22 17:15:45
|
|
Meets IEC 60601. Accessibility probes are used to test the size of openings to ensure that fingers and objects do not have access to hazardous parts ...
2020-09-22 17:15:45
|