21 - 30 of 118
iec 60061 standard
|
Gauge for testing contact-making of lamps fitted with caps E26/25 7006-29-3 Purpose: To check lamp dimensions for contact-making in E26, E26/50x39, ...
|
|
Gauge for testing contact-making of lamps fitted with caps E26/24 7006-29-3 Purpose: To check lamp dimensions for contact-making in E26, E26/50x39, ...
|
|
Not go gauge for caps on finished lamps E17, 7006-28F-1 Purpose: To check the minimum outside (major) diameter of the screw thread, dimension d, of ...
|
|
E27 Lamp Cap Gauge Include: 1) IEC60061-3 7006-27B-1 Go Gauge for E27 Caps on Finished Lamps; 2) IEC60061-3 7006-28A-1 No Go Gauge for E27 Caps on ...
|
|
|
E27 Lamp Cap Gauge Include: 1) IEC60061-3 7006-27B-1 Go Gauge for E27 Caps on Finished Lamps; 2) IEC60061-3 7006-28A-1 No Go Gauge for E27 Caps on ...
|
|
Go gauges for caps E26, E26/50x39, E26/51x39 & E26d, 7006-27D-3 Purpose: To check the maximum dimensions of the screw thread and dimension T1 minimum ...
|
|
IEC 60061-3 7006-29A-2 E26d Gauge for Caps on Finished Lamps for Testing Protection Against Accidental Contact Dimensions in millimetres The drawing ...
|
|
Not go gauge for caps E26, E26/50x39, E26/51x39 & E26d, 7006-29L-4 Purpose: To check the minimum outside (major) diameter of the screw thread, ...
|
|
Go gauge for caps on finished lamps E17, 7006-27K-1 Purpose: To check the maximum dimensions of the screw thread and dimension T1 minimum of E17 caps ...
|
|
Gauge for testing the retention of B15d caps in the holder, 7006-4B-1 According to standard IEC 60061-3 Purpose: To check cap dimensions for retention ...
|