461 - 470 of 535
other-standard
|
IEC60061-3: 7006-51A-2 Gauge for Caps on Finished Lamps for Testing Protect Against Accidental Contact During Insertion E27 Gauge for E27 caps on ...
2016-08-12 16:35:38
|
|
IEC60061-3: 7006-50-1 Gauge for Finished Lamps Fitted with E27 Caps for Testing Contact Making The drawing is intended only to illustratc the ...
2016-08-12 16:39:18
|
|
IEC60061-3: 7006-51-2 Gauge for Caps on Finished Lamps for Testing Protect Against Accidental Contact E27/51*39. Gauge for E27/51x39 caps on finished ...
2016-08-12 16:56:16
|
|
IEC60061-3: 7006-53-1 Gauge for Finished Lamps Fitted with E40 Caps for Testing Protection Against Accidental Contact Gauge for finished lamps fitted ...
2016-08-12 16:57:39
|
|
IEC60061-3: 7006-28D-1 E40 No Go Gauge for Caps on Finished Lamps Purpose: To check the minimum outside (major) diameter of the screw thread, ...
2016-08-12 16:59:40
|
|
IEC60061-3: 7006-27-7 E40 Go Gauge for Caps on Finished Lamps Go gauge for caps on finished lamps E40, 7006-27-7 Purpose: To check the maximum ...
2016-08-12 17:01:15
|
|
IEC60061-3: 7006-24C-1 E39 No Go Gauge for Caps on Finished Lamps The drawing is intended only to illustrate the essential dimensions of the gauge. ...
2016-08-12 17:02:28
|
|
IEC60061-3: 7006-24B-1 E39 Go Gauge for Caps on Finished Lamps The sharp part of the edge of the thread shall be broken with a radius of 0.2 mm to 0.3 ...
2016-08-12 17:04:03
|
|
IEC60061-3 7006-24A-1 Gauge for Finished Lamps Fitted with E39 Caps for Testing Contact-Making The plunger of the gauge is shown in the test position. ...
2016-08-12 17:05:14
|
|
IEC60061-3: 7006-46A-3 Go Gauge for Bi-pin Cap on Finished Lamps G5 IEC60061-3 G5 Lamp Cap Go Gauge (7006-46A-3) Purpose: To check dimensions E max., ...
2016-08-13 10:56:20
|