491 - 500 of 540
Products
|
IEC 61032 Test Probe C & D, IP3X and IP4X, 2.5 mm Test Rod & 1.0 mm Test Wire Basic Introduction: 1. According to: GB/T4208-2008 / IEC 61032:1997 / ...
|
|
IEC 61032 Fig.3 Test Probe C IP3X 2.5mm Test Rod with 3N Force Basic Introduction: 1. According to: GB/T4208-2008 / IEC 61032:1997 / IEC 60529:2001 / ...
|
|
75 mm Semicircle Head Test Probe of IEC60335-2-30 Diameter: 75mm, Confirm to the IEC60335-2-30, Sphere is hardened steel. Probe diameter 75mm ( Head ...
|
|
Unjointed Rigid Finger Test Probe of IRAM 4220-1 / IEC 61032 / IEC 60335 The Rigid Test Finger is a precision test probe made according to Figure 7 ...
|
|
IEC 61032 Figure 16 Test Cone for Access Probes to Hazardous Hot or Glowing Parts This probe is intended to verify the basic protection against access ...
|
|
UL 60950 Figure NAF2 S5366 and NAF3 S5370 Wedge Probe for Test Document Paper Shredders UL 60950 Wedge Probe for Paper Shredders 1. Specification: ...
|
|
IEC 60335-2-24:2010 Figure 102 - Detail of Scratching Tool Tip of Hard-soldered Carbide Tip K10 1. The scratching tool tip is for home appliances ...
|
|
IEC 61032:1997 Figure 14 Milling Test Probe 31 of Access Probes to Hazardous Mechanical Parts This probe is intended to verify the protection against ...
|
|
UL 1205 / IEC 60475 / IEC 60335-1 Figure 7 - Test Finger Nail with 30N Force Gauges Finger Nail Test Probe with 30N Force Appliance: The Finger Nail ...
|
|
DIN 40050-9 IP2X / IEC 60335 / IEC 61032 / IEC 60529 IP20C 12.5mm Rigid Steel Sphere with 50N Thrust Precision bearing steel rigid sphere 12.5 mm ...
|