421 - 430 of 540
Products
|
CEI60061-3, EN60061-3, DIN60061-3, IEC60061-3, BS60061-3 7006-28A-1 Not Go Gauge for E27 Caps on Finished Lamps Purpose: To check the minimum outside ...
|
|
IEC60061 7006-27C-1 "Go" Gauge for dimension "S1" of E27 Caps on Finished Lamps Shown on Sheet 7004-21 Purpose: To check the dimension S1 minimum and ...
|
|
IEC60061 7006-50-1 Gauge for Finished Lamps Fitted with E27 Caps for Testing Contact Making in I.E.C. Holders Purpose: To check lamp dimensions for ...
|
|
Objective: To detect the lamp holder of mechanical strength. Torsion resistance The cap shall remain firmly attached to the bulb or that part of the ...
|
|
Gauges for testing the insertion of caps in lampholders B15, 7006-4A-2 According to standard IEC 60061-3 Purpose: To check B15 cap dimensions for ...
|
|
Gauges for testing the insertion of caps in lampholders B22, 7006-4A-2 According to standard IEC 60061-3 Purpose: To check B22 cap dimensions for ...
|
|
Objective: To detect the lamp holder of mechanical strength. Torsion resistance The cap shall remain firmly attached to the bulb or that part of the ...
|
|
According to standard IEC 60061-3 Purpose: To check dimensions A max., N min. D1 min., D1 max., and the diametrical position of the pins of caps B15 ...
|
|
Gauge for testing the retention of B22d caps in the holder, 7006-4B-1 According to standard IEC 60061-3 Purpose: To check cap dimensions for retention ...
|
|
Go gauges for caps on finished lamps BA9, B15, BA15 & B22, 7006-11-8. According to standard IEC 60061-3 Purpose: To check dimensions A max., N min. D1 ...
|