391 - 400 of 540
Products
|
Gauge for finished lamps fitted with E40 caps for testing protection against accidental contact E40, 7006-53-1 Purpose: To check protection against ...
|
|
Gauge for testing contact-making of lamps fitted with caps E26/24 7006-29-3 Purpose: To check lamp dimensions for contact-making in E26/24 lampholders...
|
|
For details of base GU5.3/MR16, see sheet 7004-109. PURPOSE: To check the base GU5.3 in the following respects: -the diameter of the individual pins ...
|
|
The drawing is intended only to illustrate the essential dimensions of the gauge. For details of cap E39, see sheet 7004-24A. PURPOSE: To check the ...
|
|
Not go gauge for caps on finished lamps E12, 7006-28C-1 Purpose: To check the minimum outside (major) diameter of the screw thread, dimension d, of ...
|
|
The sharp part of the edge of the thread shall be broken with a radius of 0.2 mm to 0.3 mm. PURPOSE: To check the maximun dimensions of the crew ...
|
|
IEC60061-3 G5 Go Not Go Gauge for Lamp (7006-46-3) Purpose: To check dimensions E min., E max., F min., G max., Hmax., and the combined pin diameter ...
|
|
Not go gauges for caps on finished lamps B22, 7006-10-8 According to standard IEC 60061-3 Purpose: To check dimension A in, of caps B22 on finished ...
|
|
Go gauge for caps on finished lamps E12, 7006-27H-1 Purpose: To check the maximum dimensions of the screw thread and dimension T1 minimum of E12 caps ...
|
|
Not go gauge for caps on finished lamps E17, 7006-28F-1 Purpose: To check the minimum outside (major) diameter of the screw thread, dimension d, of ...
|