201 - 210 of 540
Products
|
Fa8 Not Go Gauge for Single-pin Cap, 7006-40A-1. Purpose: For the control of dimension E min. of sheet 7004-57. Testing: When the gauge is applied to ...
|
|
IEC 60360 Figure 3 - E14/20 Lamp Caps According to standard EN 60360 / IEC 60360 figures 3, used to auxiliary test of temperature rise in the draught...
|
|
IEC 60360 Figure 5 - E27/51x39 Lamp Caps According to standard EN 60360 / IEC 60360 figures 5, used to auxiliary test of temperature rise in the ...
|
|
Unjointed Rigid Finger Test Probe of IRAM 4220-1 / IEC 61032 / IEC 60335 The Rigid Test Finger is a precision test probe made according to Figure 7 ...
|
|
2,5mm Test Rod - Test Probe C of IEC61032 Basic Introduction: 1. According to: IEC 61032:1997 / IEC 60529:2001 / IEC 60065 / IEC 60598 and UL 2. IP3X ...
|
|
IEC 61032:1997 Test Probe D IP4X Test Wire 1.0 mm Basic Introduction: 1. According to: GB/T4208-2008 / IEC 61032:1997 / IEC 60529:2001 / IEC 60065 / ...
|
|
The Jointed Test Finger is a precision test probe made according to Figure 2 (Fig. 2) of the IEC 61032 (Test probe B) and is used to simulate a human ...
|
|
Meets IEC CSA & UL requirements Test Probe 13 of Short Test Pin - Fig. 9 of EN 61032 This Test Probe Pins (Figure 9 - Test probe 13 of IEC 61032) is ...
|
|
Small Finger Probe 8,6 Test Probe 18 of IEC 61032 Conforms to: Standard IEC61032-1997. IEC 61032 Figure 12 – Test probe 18 (small finger probe ∅ 8,6) ...
|
|
Small Finger Probe 5,6 Test Probe 19 of IEC 61032 IEC 61032 Figure 13 – Test probe 19 (small finger probe ∅ 5,6) – Finger: metal material – Handle: ...
|