231 - 240 of 540
Products
|
CEI IEC 60884-1 Figure 10 Socket-outlets Protection Test Probe with 1N Force Basic Introduction: 1. According to : IEC 60884 Fig 10 2. The test probe ...
|
|
IEC60335 50N Test Finger Nail,FingeNail Test Probe Appliance: The Finger Nail Probe is indicated test IEC60335 and UL requirements. Used to check the ...
|
|
Basic Introduction: According to: IEC 60065:9.1.3, GB 8898:9.1.3, EN 61010-1, UL 3101-1, and CSA 1010-1. Openings of the enclosure Technical ...
|
|
According to: EN61010-1 6.2.3 Used to verify protection against access to hazardous parts by use of a tool through holes which give access to preset ...
|
|
This probe conforms to the standard requirement of UL1278 Fig 10.1. The handle is made of nylon while the probe is made of stainless steel. The shape ...
|
|
Specification: 1. According to: UL 507 Figure 9.2 (PA100A), UL1017 figure 2, figure 6.5 UL1062, UL982 figure 7.1 and figure 1.2 UL474 figure 5.1 and ...
|
|
UL Rigid test finger 130A meets the standard requirements of UL 507&UL 1287, used for simulating fingers and appliances. It is mainly used for ...
|
|
The probes referenced in Table 9.1 and illustrated in Figures 9.1 and 9.2 shall be used as measuring instruments to judge the accessibility to ...
|
|
The probe is used for the enamel wire, shall be applied to any depth that the opening will permit and shall be rotated or angled before, during, and ...
|
|
1,The rotor of a motor, a pulley, a belt, a gear, a fan, or other moving parts shall be enclosed or guarded to reduce the risk of injury to persons. 2...
|