31 - 40 of 48
iec-60065-standard
|
IEC 61032 Test Probe 13 meets IEC CSA & UL requirements This pin probe is intended to verify the protection against access to hazardous live parts in ...
2020-09-22 17:15:46
|
|
Specification: Standard: IEC60065 figure 6, UL1310. Application: It is mainly used for thin-layer insulation material electric strength. Fixture have ...
2016-11-17 11:18:51
|
|
Precision bearing steel rigid sphere 12.5 mm (IP2XC) - IEC 60529 IEC 60065 IEC 60035 1.Application: The rigid sphere IP20C (12.5 mm) is designed and ...
2020-09-22 17:15:46
|
|
UL60065 / EN60601 Figure 4 - IEC Stainless Steel Test Hook Test Hook Probe: It is used prior to accessibility testing. This probe is put into vents ...
2020-09-22 17:15:46
|
|
Product Specifications: For measuring and testing the torque strain exerted by appliances with plug pins on socket-outlets, in accordance with IEC ...
2016-11-16 18:48:57
|
|
Meets IEC CSA & UL requirements Test Probe 13 of Short Test Pin - Fig. 9 of EN 61032 This Test Probe Pins (Figure 9 - Test probe 13 of IEC 61032) is ...
2016-08-11 15:59:56
|
|
EN IEC 60950 Figure 4A / EN IEC 60065 Figure 8 - 50mm Impact Test Steel Ball with Ring Application: The Impact Ball 50mm is designed to test impact ...
2016-08-10 16:38:48
|
|
12,5mm Steel Sphere - Test Probe 2 of IEC61032 1.Application: The rigid sphere (12.5 mm) is designed and manufactured to perform the test specified in ...
2016-08-11 14:54:06
|
|
50mm Test Ball - Test Probe 1 of IEC61032 Application: The Rigid Sphere (50mm) is designed and manufactured to perform the test specified in many ...
2016-08-11 15:05:52
|
|
IEC 61032:1997 Test Probe D IP4X Test Wire 1.0 mm Basic Introduction: 1. According to: GB/T4208-2008 / IEC 61032:1997 / IEC 60529:2001 / IEC 60065 / ...
2016-07-13 15:27:21
|