21 - 30 of 70
iec-61032-standard
|
IEC 61032 Test Probe 11/ Rigid Finger Probe Purpose: This probe may be used to verify the protection of persons against access to hazardous parts and ...
2020-09-22 17:15:45
|
|
Jointed IEC Test Finger with 10 Thrust Force Level: 10N 1. Conforms to: Standard IEC 61032-1997, IEC 60529-2001, GB/T4208-2008 and UL etc. 2. The ...
2020-09-22 17:15:46
|
|
Product Description Consists of six test probe: 1) Test Probe 13 of IEC 61032 2) 50mm Test Steel Sphere 3) Unjointed Test Finger with 50N 4) Jointed ...
2016-06-13 11:28:51
|
|
Product Description Consists of five test probe: 1) Test Probe B of IEC 61032 2) Test Probe 13 of IEC 61032 3) IEC 60065:2005 Figure 3 - Example of ...
2016-06-13 11:04:12
|
|
Test Finger Probe with Diameter 125 mm Circular Stop Face of IEC60335-2-14 20.2 The test probe is carried out with a test probe similar to that of ...
2016-08-11 10:52:17
|
|
IEC/EN 61032 Figure 3 2.5 mm Test Rod with 3N Thrust & IEC/EN 61032 Figure 4 1.0 mm Test Wire with 1N Thrust Basic Introduction: 1. According to: GB...
2020-09-22 17:15:41
|
|
Meets IEC CSA & UL requirements Test Probe 13 of Short Test Pin - Fig. 9 of EN 61032 IEC 61032 Test Probe 13 meets IEC CSA & UL requirements This pin ...
2020-09-22 17:15:41
|
|
IEC Standard Test Probe B IP2X Test Finger for Equipment Jointed Test IEC 61032 the Standard Jointed Test Finger Probe B IP2X Protection Probe 1. ...
2020-09-22 17:15:42
|
|
IRAM 4220-1 Standard IP2X Jointed Test Finger with Test Cable IEC 61032 the Standard Jointed Test Finger Probe B IP2X Protection Probe 1. Conforms to: ...
2020-09-22 17:15:41
|
|
SASO/IEC 60335-1, SASO IEC 60950, IEC 60950/EN60950 Non-Jointed Test Finger for Test Accessibility of Internal Conductive Parts The Rigid Test Finger ...
2020-09-22 17:15:41
|