11 - 20 of 21
iec 60065 standard
|
Basic Introduction: According to: IEC 60065:9.1.3, GB 8898:9.1.3, EN 61010-1, UL 3101-1, and CSA 1010-1. Openings of the enclosure Technical ...
|
|
IEC 61032 Test Probe 13 meets IEC CSA & UL requirements This pin probe is intended to verify the protection against access to hazardous live parts in ...
|
|
Basic Introduction: According to: IEC 60065:9.1.3, GB 8898:9.1.3, EN 61010-1, UL 3101-1, and CSA 1010-1. Openings of the enclosure Technical ...
|
|
Basic Introduction: According to: IEC 60065:9.1.3, GB 8898:9.1.3, EN 61010-1, UL 3101-1, and CSA 1010-1. Openings of the enclosure Technical ...
|
|
Meets IEC 60065. Accessibility probes are used to test the size of openings to ensure that fingers and objects do not have access to hazardous parts ...
|
|
Product Details Used on enclosures prior to accessibility testing. The test hook is hooked into vents and seams in the enclosure and then pulled with ...
|
|
IEC60065 Dielectric Strength Test Instrument for Electrical safety testing Application: It's mainly used for testing thin-layer insulation material ...
|
|
IEC 61032 Test Probe 11/ Rigid Finger Probe Purpose: This probe may be used to verify the protection of persons against access to hazardous parts and ...
|
|
IEC 60065 Figure 8 - Impact test using a steel ball Application: The Impact Ball 50mm is designed to test impact according to IEC, UL, and CSA ...
|
|
IEC60065 Dielectric Strength Test Instrument for Electrical safety testing Application: It's mainly used for testing thin-layer insulation material ...
|